LEGO® Speed Champions F1 Display Frame UK 2026
LEGO® Speed Champions F1 Display Frame UK 2026
The complete grid on one wall. All ten 2024-season cars, no wires crossing the bodywork, one concealed USB cable.
All ten cars look spectacular on a starting grid, but there's a frustrating display problem: their low profiles hide the sidepods, printed wheel covers and intricate centre sections when they sit on an ordinary shelf. A LEGO Speed Champions F1 display frame UK collectors can mount at eye level solves that problem, while an LED edition adds an even wash of light without threading wires through ten delicate cars.
This guide reviews the complete 2025 Speed Champions F1 wave based on the 2024 championship, then shows you how to create a secure illuminated wall display with a concealed USB cable. You will also find exact set compatibility, current UK prices and a practical smart-home setup.
What Is the Best LEGO® Speed Champions F1 Display Frame?
The LED edition is the stronger choice for a hallway, gaming room or home office because the light reaches the whole grid from outside the cars. That preserves the models, avoids ten separate power leads and keeps their varied undersides unobstructed.
From Video Review to Illuminated Reality
Raised to eye level, the varied bodywork, printed wheel covers and driver figures become far easier to appreciate than on a flat shelf.
These are ten 2025 LEGO® sets based on the cars that competed during the 2024 Formula 1 season. They share recognisable elements around the nose, halo, rear wing and rear-wheel supports, but their centre sections, floor details, inlets and undersides use surprisingly different solutions.
That variety is the collection's biggest achievement. The builds are not simply one chassis repeated in ten colours. The curved nose treatment, printed wheel covers and improved front suspension all move the range forward, while the different construction methods make building the full grid more interesting than expected.
There are compromises. Applying so many sponsor stickers becomes tiring, some camera pods are easy to knock out of alignment and the flat rear treatment works better on certain cars than others. The Aston Martin green looks noticeably different from the real AMR24 colour, and some wheel-cover and rear-light prints can be off-centre.
Which Ten LEGO® F1 Cars Are in the 2025 Collection?
| Set | Official Model | Pieces | UK RRP |
|---|---|---|---|
| 77242 | Ferrari SF-24 F1® Race Car | 275 | £22.99 |
| 77243 | Oracle Red Bull Racing RB20 F1® Race Car | 251 | £22.99 |
| 77244 | Mercedes-AMG F1® W15 Race Car | 267 | £22.99 |
| 77245 | Aston Martin Aramco F1® AMR24 Race Car | 269 | £22.99 |
| 77246 | Visa Cash App RB VCARB 01 F1® Race Car | 248 | £22.99 |
| 77247 | KICK Sauber F1® Team C44 Race Car | 259 | £22.99 |
| 77248 | BWT Alpine F1® Team A524 Race Car | 258 | £22.99 |
| 77249 | Williams Racing FW46 F1® Race Car | 263 | £22.99 |
| 77250 | MoneyGram Haas F1® Team VF-24 Race Car | 242 | £22.99 |
| 77251 | McLaren F1® Team MCL38 Race Car | 269 | £22.99 |
Together, the collection contains 2,601 pieces and ten driver minifigures. Buying every set separately at original UK RRP costs £229.90.
Is an LED Display Frame Better Than Ten Internal Light Kits?
The cars are shallow, compact and structurally different beneath the bodywork. Routing LEDs inside every model would require repeated disassembly, ten separate wire paths and careful avoidance of the front suspension, floor fences, camera pods and rear wings.
An LED display frame illuminates the collection as one composition. It gives each livery consistent brightness, leaves the cars removable and uses one USB power route. It also avoids visible wires crossing the red, papaya, blue, green and pink bodywork.
Which LEGO® F1 10-Car Display Frame UK Option Fits Your Collection?
| Option | Price | Format | Best For | Compatibility Note |
|---|---|---|---|---|
| 50×80 cm Standard | £85.90 | Vertical | Original ten-car grid, well-lit room | 77242–77251; no lighting |
| 50×80 cm LED | £135.90 | Vertical + USB light | Best illuminated display for video grid | 77242–77251 |
| 120×45 cm Track | from £146.90 | Panoramic | Wide racing-wall layout | Confirm set numbers before ordering |
| 120×45 cm Grand Prix | from £157.90 | Panoramic | Updated ten-car line-up | Replaces Sauber 77247 with Audi 77259 |
| 120×45 cm 12-Car White | from £150.90 | Panoramic | Collectors expanding beyond original grid | 77242–77252 + 77259 |
The 12-Car White Grand Prix frame at 120 × 45 cm — ideal if you're expanding beyond the original 2024-season grid.
How Do You Display All 10 LEGO® F1 Cars with No Visible Cable?
The Zero-Wire Challenge is about hiding the cable, not pretending it doesn't exist. On the LED edition, the single USB lead should disappear from the normal viewing position while remaining accessible for safe maintenance.
-
1
Confirm the Ten Set Numbers
Lay out your cars and check each number against the chosen frame before drilling or attaching any wall fixings — especially if your collection mixes the original Sauber with a newer Audi.
-
2
Choose the Wall and Power Exit
Select a wall away from strong direct sunlight. Identify the nearest UK socket and decide whether the USB cable will leave from the lower-left or lower-right rear corner of the frame.
-
3
Test the LED Edition Before Mounting
Connect to a correctly rated 5V USB power source and check the complete light run. Do not mount the frame until you know the lighting and cable are working.
-
4
Mark a Level Position
Use a spirit level and low-tack decorator's tape to mark the top and side edges. Place the centre close to seated or standing eye level so the cars are seen from above rather than edge-on.
-
5
Use Fixings Suitable for Your Wall
Brick, block, timber and plasterboard each require different fixings. Use the supplied hardware only where it suits the wall construction and total installed weight.
-
6
Route the USB Lead Behind the Frame
Create one gentle service loop behind the lower corner, then guide the cable vertically towards the socket. Do not trap, sharply fold or load the cable beneath the frame.
-
7
Conceal the Visible Section
Use slim paintable cable trunking or low-profile cable clips from B&Q or Screwfix. Match the trunking to the wall colour and keep the USB connector accessible. Never glue the lead to the acrylic panel.
-
8
Mount the Cars Carefully
Use the included mounting bricks as intended. Support each car by its stronger centre structure and avoid pressing on the rear wing, camera pod or floor details.
-
9
Complete a Darkness and Glare Test
Switch off the room lights and view the frame from the doorway, desk and normal standing position. If a hotspot reflects from a glossy sticker, adjust the frame position rather than moving LEDs onto the cars.
Should LEGO® F1 Display Lighting Be Warm White or Cool White?
Neutral white is the best compromise for this collection. If your lighting controls offer a colour-temperature choice, aim for roughly 3500K to 4500K.
Can make Mercedes and Haas white look cream; may shift Aston Martin green.
Best balance for ten liveries. Keeps Ferrari red, papaya and pink distinct.
Can flatten Ferrari red, McLaren papaya and Alpine pink. Use sparingly.
Avoid rapid rainbow fades for everyday display — they compete with the team colours and make sponsor stickers harder to read. A steady, moderate output also reduces reflections from the acrylic and glossy decorated elements.
Can the LED Display Frame Work with Alexa or Google Home in the UK?
Yes. The simplest method is to control its USB power adaptor with a UK Type G smart plug.
Connect the frame's USB lead to a suitable 5V USB adaptor. Plug the adaptor into a Type G smart plug, then add that plug to Alexa or Google Home through its manufacturer app. Name the device "F1 display" and create an evening routine or automatic switch-off time.
UK Buying Hub
Prices and stock checked 11 October 2026 and can change.
| UK Retailer | Approximate Price | What to Check |
|---|---|---|
| LEGO.com UK | £22.99/car · £229.90 for ten | Nine models retiring soon; Sauber 77247 retired |
| Smyths Toys | £16.99–£17.99 per car | Sauber not listed; check local click-and-collect stock |
| Argos | ~£23 per listed car | Availability depends on postcode; search by exact set number |
| Amazon.co.uk | ~£15.95 selected models | Confirm seller, delivery charge, box condition and returns policy |
| BrickZoneHub | £85.90 standard / £135.90 LED | Cars not included; choose correct edition and set compatibility |
How Do You Photograph the Illuminated F1 Grid?
No Flash
Turn off the phone flash — it creates harsh reflections on glossy stickers and acrylic. Use the LED lighting to control the scene.
Shoot at Dusk
Photograph at dusk or close the curtains so the frame lighting, not bright window light, controls the exposure.
Tap to Expose
Tap the brightest white area on screen, then reduce exposure slightly until sponsor stickers and wheel prints stay visible.
Slow Pan for Video
Start unlit, switch on LEDs, then move slowly from Ferrari to McLaren. Avoid fast pans — dense sponsor graphics become muddy.
Share your finished display with UK LEGO® photography and AFOL communities using #AFOLUK #LEGOUK #SpeedChampions #LEGOF1.
Frequently Asked Questions
Final Verdict
Browse the complete BrickZoneHub Speed Champions frame range for more layout options.
Would you keep the original 2024-season grid with Sauber, or update your wall display with Audi? Share your choice in the comments and subscribe to the YouTube channel for the full ten-car video tour.
LEGO® is a trademark of the LEGO Group. Formula 1® and the team names and marks belong to their respective owners. BrickZoneHub products are independent accessories and are not sponsored, authorised or endorsed by the LEGO Group. LEGO® sets and cars are not included unless a product page explicitly states otherwise.